Pooli Gamma 4 OS030981K, Руководство по эксплуатации продукта

Страница: 14 / 16

12
6. Maintenance
6.1. How to drain the water from your SPA?
Please ensure the power is off before draining your SPA.
(1) Locate the drain valve at the corner of your spa cabinet (marked as "drainage").
(2) Pull the drain valve halfway out. When the pipe is pulled to its outermost position, the drain valve will be locked
and cannot drain.
(3) Remove the cap by turning it counterclockwise. The cap can be tight for the first time, you may need to use pliers.
(4) The drain valve can be connected to a hose if you want to discharge water to other places.
(5) Once the SPA is emptied, use a wet/dry vacuum cleaner to suck out the remaining water from the jet and the seat.
Remember if the SPA has a bubble system, please turn on the power and turn on the air pump to drain the excess
water. After about 10 seconds, user can turn off the power.
(6) Finally, install the cover clockwise and return it to its position.
6.2. Water quality
The water in the SPA can be contaminated in many ways. Due to warm water and abundant food supplies, such as
sweat, dander, skin cream and hair, bacteria can multiply explosively. Users can use some chemical additives to ensure
good water quality. In addition, users need to check the pH of the water regularly. If the scale shows that the pH is 7, it
is within the optimal range. Problems caused by water quality problems are not covered by the warranty.
•If the water is hard, use calcium stabilizers.
•Use disinfectants such as chlorine/bromine. You can balance the values by reviewing pH and alkalinity.
Weekly
•Add water appropriately.
•Check and adjust pH and alkalinity.
•Test the chlorine/bromine in the water.
•Add a scale stabilizer when the water is hard.
•Clean the filter paper core with water.
Every 3-4 months
•Clean the SPA. The swimming pool should be cleaned every quarter. Drain the water and clean the acrylic surface
with a cleaner.
If the filter paper core is found to be damaged, please replace it in time.