L0311 Rev 3 6-21
© Latham Pool Products, Inc. 2021. All rights reserved.
Page 7 of 9
Standard Setup Procedure (cont.):
Over The Air (OTA) Update:
1. On your device with the update file, open the list of WiFi networks. Connect to the Touch
Controller
’
s WiFi Network
a) The Touch Controller network will be listed as a
“
Latham-ABCDEF
”
where ABCDEF
will be a letter number combination specific to your device.
b) The Password for the network will be
“59915991”
2. Open a web browser and type in the IP address of your primary touch controller.
a. To find the IP address log into the touch controller under the service code and enter the Setup menu.
b. Enter the Device Setup menu then enter Device Setup. The IP address will be displayed on the top of the
screen. (ex. 10.100.10.1).
3. Click the Browse
…
button and navigate to the update file saved on your
device.
4. Select the Update button to begin the update. The update will take up to 2
minutes, do not attempt to refresh the connection or click additional
buttons. This could lead to device issues or disturb the update process.
5. After a successful update the message
“
Update Success! Rebooting
…”
will display.
6. The Touch Controller will reboot into updated firmware.
Menu structure:
Lock Screen:
The Touch Controller will default to this screen on restarts and after screen
timeouts. The device can be unlocked using one of 4 user passwords or the
maintenance password. By default, User 1 will be
“1234”
and the
maintenance code will always be
“5991.”
The service icon will display
contact information set by the installer which a homeowner can use in case
of issues.
Select Cover Screen:
From this screen you can either select a cover to operate or select Setup to go further into available options. A large
button will either select the default cover or move to a screen to set the default cover depending on if one is configured.
The Other Covers button will allow the user to select other covers in the network to operate if available.
Cover Operation Screen:
Allows operation of a pool cover via the Open and Close buttons. For safety, the cover will only operate when an
operation button is held.
The top bar will display the cover selected in addition to any notifications during operation. This screen will timeout by
default with 20 seconds of inactivity (max allowable).
Set Passwords:
Passwords to unlock the device are configured on this screen. User 1 and Maintenance User are able to modify all 4
passwords. All other users can only modify their own password and name.
To modify a user
’
s name, tap the name and edit with the onscreen keyboard. To modify a password, tap the number to
edit and set using the onscreen key pad.
User Settings:
Allows configuration of settings on the device. Key Beep will adjust the tone played during button presses. There are 4
options including off. Touchpad Timeout will set how long the screen stays unlocked during cover operation when no
button is pressed. Screen brightness can be adjusted using the displayed slider. The Set time button will bring up a
screen to adjust the time, date, and time zone. If connected to a WiFi network, internet time can be used to automatically
set the time.
WiFi Setup:
From this screen you can connect the device to the internet through a home WiFi network, or lock/unlock the local
wireless network.
To download the
latest firmware either
scan the QR code or
enter the URL below
into your browser.
https://rb.gy/suvbuu