Pontiac 2008 Wave, Руководство пользователя

Страница: 168 / 380

AM-FM Radio (Single Display, Base
Level)
Playing the Radio
O (Power): Press this knob to turn the system on
or off.
u
(Volume): Turn this knob to increase or to
decrease the volume. VOL will appear on the display.
Finding a Station
AM/FM: Press this button to switch between FM1, FM2,
or AM. The display will show the selection.
p
(Tune): Turn this knob to select radio stations.
t u
(Scan): Press this knob until SCAN flashes on
the display, then press either the up or the down
arrow buttons to determine the direction for the radio to
scan the stations. The radio will go to a station, play
for a few seconds, then go on to the next station. Press
either arrow button again to stop scanning.
The radio will only scan stations with a strong signal
that are in the selected band.
Setting Preset Stations
Up to 18 stations (six FM1, six FM2, and six AM) can be
programmed on the six numbered pushbuttons, by
performing the following steps:
1. Turn the radio on.
2. Press AM/FM to select FM1, FM2, or AM.
3. Tune in the desired station.
4. Press and hold one of the six numbered
pushbuttons for longer than two seconds. Ch will
appear on the display when the station has
been set. Whenever that numbered pushbutton is
pressed, the station that was set will return.
5. Repeat the Steps 1 through 4 for each pushbutton.
3-54