Pontiac 2007 G6, Руководство пользователя

Страница: 134 / 486

Manual Transaxle Operation
This is your shift pattern.
The clutch must be fully
pressed in when shifting
a manual transaxle to
ensure the transaxle is
fully in gear.
Here is how to operate your transaxle:
FIRST (1): Press the clutch pedal and shift into
FIRST (1). Then, slowly let up on the clutch pedal
as you press the accelerator pedal.
You can shift into FIRST (1) when you are going
less that 20 mph (32 km/h). If you have come to a
complete stop and it is hard to shift into FIRST (1),
put the shift lever into NEUTRAL and let up on the
clutch. Press the clutch pedal back down. Then shift
into FIRST (1).
SECOND (2): Press the clutch pedal as
you let up on the accelerator pedal and shift into
SECOND (2). Then, slowly let up on the clutch
pedal as you press the accelerator pedal.
THIRD (3), FOURTH (4), and FIFTH (5) and
SIXTH (6):
Shift into THIRD (3), FOURTH (4) and
FIFTH (5) and SIXTH (6) the same way you do
for SECOND (2). Slowly let up on the clutch pedal
as you press the accelerator pedal.
To stop, let up on the accelerator pedal and press
the brake pedal. Just before the vehicle stops,
press the clutch pedal and the brake pedal,
and shift to Neutral.
NEUTRAL: Use this position when you start or
idle your engine.
REVERSE (R): To back up, press down the
clutch pedal and lift up on the ring on the shift lever
to shift into REVERSE (R). Let up on the clutch
pedal slowly while pressing the accelerator pedal.
Notice: Shifting to REVERSE (R) while your
vehicle is moving forward could damage the
transaxle. The repairs would not be covered by
your warranty. Shift to REVERSE (R) only after
your vehicle is stopped.
134