15
OnStar
®
(if equipped)
Programming the Transmitter
With the ignition OFF, program the
transmitter as follows:
1. Press and hold down the two outside
buttons until the indicator light flashes
and then release the buttons (about
20 seconds — do not hold for more
than 30 seconds); do not repeat this
step for the second or third devices
to be added to the system.
2. Hold your hand-held transmitter
near the surface of the HomeLink
®
transmitter. Then hold the button on
the hand-held unit and the button on
the HomeLink
®
transmitter you will
assign it to.
3. Continue holding both buttons (up to
90 seconds); the indicator light will
begin blinking slowly and then more
quickly. Programming is complete
when the light on the HomeLink
®
transmitter flashes rapidly.
4. Release both buttons; then press and
hold the HomeLink
®
button again. If
the indicator light remains lit, pro-
gramming is complete.
To program the remaining two
HomeLink
®
buttons, begin with Step 2
(above). Do not repeat Step 1, as this
will erase all of the programmed
channels.
See Section 2 of your Owner Manual.
Note: If the HomeLink
®
indicator light
blinks rapidly for two seconds and
remains on, it indicates that your device
(usually a garage door opener) has a
“rolling code.” See your Owner Manual.
If your vehicle is OnStar-equipped, the
OnStar system provides in-vehicle safe-
ty, security, and communications servic-
es, available 24 hours a day, 7 days a
week. These services are easily
accessed through the three OnStar
buttons in your vehicle.
• Press the Blue OnStar Button to
connect to an OnStar Advisor for
services such as GM Goodwrench
Remote Diagnostics or routing and
location assistance.*
• Press the Phone Button to access
OnStar Personal Calling, a hands-
free, voice-activated communications
service.**
• Press the Red Emergency Button to
connect to an OnStar Advisor who
can contact a nearby emergency
services provider to dispatch
ambulance, police, fire, or other
emergency services to your location.
For more information about OnStar fea-
tures, refer to the OnStar Owner’s
Manual and Audio Tour CD, located in
your glove box.
*Routing and location assistance may require
service upgrade
**Available in most markets
See Section 2 of your Owner Manual.
