PW636i
Hardware Instruction Manual
10
Pause button
The
Pause
button on the front panel is designed to cut the current/voltage outputs either for test
purpose or under emergency case.
‘Manual’ control mode
‘Auto’ control mode
Push ‘
Pause
’ button
cut the current/voltage
cut the current/voltage, PC
software will continue to run
Release ‘
Pause
’ button
current/voltage output will be
recovered from the point
where we push the
Pause
button
current/voltage output will be
recovered from the software
execution point at the moment
we release the
Pause
button
LED Indication
The LED indication on the front panel gives information about the hardware working conditions
In normal working condition the status of LEDs will have the following indication in ‘Power on’ and
‘Testing process’ conditions
