PondMAX 24PL680, Инструкция по эксплуатации

Страница: 5 / 16

WAT E R G A R D E N I N G T O T H E M A X WAT E R G A R D E N I N G T O T H E M A X
COLOR CHANGING LED
LIGHTING SYSTEM
• If required, have a qualified electrician install an outdoor GFCI protected hooded flush type cover plate receptacle
marked “Wet Location” and following the requirements above.
• Route fixture cable to desired fixture locations. CAUTION: Fixture(s) must be installed in accordance with all local
codes and ordinances.
• Follow the remaining steps in this manual before plugging in the ransformer to a GFCI outdoor electrical outlet
that has a weather-resistant cover. Do not use an extension cord to power ransformer.
TRANSFORMER INSTALLATION
Install the ransformer unit 10 feet (3.05 m) or more from a water feature and 12 inches (0.3m) above the ground.
Mount the ransformer to a secure object such as a post or the side of your home. (See diagram below)
TRANSFORMER ADAPTER CABLES
INSTALLATION
• Connect your 3 t. ransformer dapter able (2) plug to the outlet side of the ransformer (1) and tighten the rubber
nut to ensure a safe connection.
• The ransformer dapter able can also be cut and spliced rather than the light cable, to allow connection to any
other approved 12 Volt AC ransformer. This will not void the warranty of the lighting system.
MAINTENANCE
• Do not submerge the ransformer dapter able.
• Check that the connections on the ransformer dapter able are tight on a periodic basis.
MAINTENANCE
• Do not submerge ransformer.
• Do not repair, or tamper with the power cord or plug.
• Keep ransformer free of debris and/or plant life to reduce the risk of fire.
1. 2.
* ALL PICTURES SHOWN ARE FOR ILLUSTRATION PURPOSE ONLY. ACTUAL PRODUCT MAY VARY
4