Pondmaster 05610 Скачать руководство пользователя страница 9

9

WINTERIZATION

CAUTION: During harsh winters, water left in the drum may freeze, expand and crack the 

drum.  If necessary, the filter can be drained and winterized at the end of the season.  If you 

live in an area that doesn’t experience freezing temperatures, you may never need to do this.

To empty the water from the filter drum, it is not necessary to open the filter.
1) Turn off the pump and disconnect the power source to the UV.
2) Turn the Valve to position #7 WINTER.
3) Remove the drain plug at the bottom of the filter to empty the filter from the bottom. 

Note that the drain plug adaptor has a ½” NPT female thread for attachment to ½” NPT male 

fittings. If you want to attach a hose to the bottom drain, you can purchase a ½” NPT fitting 

to connect to the bottom drain adaptor and to a hose. ½” NPT fitting are available at 

hardware stores or irrigation supply centers
4) If your set-up includes a UV Clarifier, rotate the lock ring counter clockwise to remove it. 

Pull the socket cap/light unit assembly straight up, being careful not to break the UV lamp. 

Disconnect lamp from socket by grasping the plastic base of the lamp and carefully pulling it 

straight apart from the socket cap. Remove the quartz sleeve from the filter cover by pulling 

straight upwards. Pack the quartz sleeve and UV lamp carefully and store it with the O-ring 

and socket cap/ ballast for winter. Cover the open UV port with the clear extra UV port cap 

that was placed in storage. DO NOT ALLOW WATER TO GET INTO UV QUARTZ SLEEVE AND 

FREEZE. IT WILL CRACK WHEN WATER FREEZES.

CLEARGUARD BACKWASH AIR KIT: 

For more thorough backwashing and 

agitation in the media filter chamber to break up the stubborn debris. It 

connects though the drain plug at the bottom of the pressure filter. 

UV Clarifier

 - Upgrade your filter by adding 

an ultraviolet clarifier to a non UV unit or 

add a second UV clarifier using the extra 

port for additional algae control. 

Replacement 

Filter Pads

 - 

Available to 

replace the 

filter pads 

that were 

supplied with the pressure filters. 

For 2700, 5000 & 8000 series 

Pressure filter use ITEM15640. 

For16000 Pressure filters use 

ITEM 15645. 

Biomatrix 1

1

/

4

” (32mm)Ball Media

 - Increase the biological filtration by 

adding more media. The Biomatrix Ball media is the only media recom-

mended for use with ClearGuard pressure filters. Available in bags of 300 

ITEM # 15650.

Caution: Do not use undersized media; it will get caught in valve and 

possibly damage the filter. 

OPTIONAL ACCESSORIES 

120V ONLY

Pond Filter 

Capacity

Maximum water

pump size

2700 GAL / 10000 L
5500 GAL / 20000 L
8000 GAL / 30000 L

3000 GPH / 11350 LPH
6000 GPH / 22700 LPH
8000 GPH / 30300 LPH

Clearguard Backwash Air Kit Item #

No airpump included Airpump included (120V) 

15675
15675
15675

15660
15660
15670

16000GAL / 60000 L 9000 GPH / 34000 LPH

15675

15670

Filter Item #

2700
5500
8000 

120V

230V

15

8

10

15

8

20

15611
15621

16000 

Watage

Voltage 

9W

18W
18W
18W

15

8

20

15

8

20

15621
15621

Содержание 05610













Отзывы: