Impulse Whiteboard Operation
15
Impulse™ L
TX Multimedia Whiteboar
d System
clear the board’s memory. Alternatively, if you need to be certain you are
leaving no confidential information in the board’s memory, you can clear it.
Images saved in the archive are not affected.
When the Impulse system believes the board memory is clear, the green
Ready LED is on. When the system memory contains data, the red In Use
LED is on.
To clear the Impulse memory:
•
Press Start on the control panel.
P
ROJECTING
A
RCHIVED
I
MAGES
ON
THE
I
MPULSE
B
OARD
When you press the control panel Website/Archive button, the Impulse
system saves an image of the board in the board’s built-in archive. (At the
same time, the Impulse system captures the image as a file on its built-in
web server. Refer to “The Impulse Web Server” on page 31 for information
about working with files on the Impulse web server.) You can review images
saved in the archive by projecting them back onto the Impulse board.
Setting up the Projector
To review images from the board’s archive, connect a projector to the
Impulse board using a projector cable. A projector may already be
connected to the Impulse system. If this is the case, proceed to “Reviewing
Archived Images” on page 16.
Whiteboard
Help
Volume
Memory
Ready
In Use
Start
LTX_UG_04.fm Page 15 Thursday, April 7, 2005 11:38 AM