Polytron SPM 200 LAN, Руководство пользователя

Страница: 15 / 24

15
10.1 Programming of modules
Below procedure shows how to select one module slot and thus the corresponding module.
The programming of the modules is described in the respective operating instructions.
NOTE
If the software does not detect a new module then the slot of this module is not displayed (skipped) while scrolling up
or down, i.e. the firmware needs to be updated (see section 10.2).
Parameters of the
selected module can be
programmed here
Scrolling from PL01
to PL02
→
Program
↨
Service
Polytron Headend
SPM A.1
← PL02 SPM-S2C
→
↨
PL01 SPM-S2CT
← PL01 SPM-S2CT
→
↨
PL02 SPM-S2C