STEP-BY-STEP ASSEMBLY:
E & F:
Front Legs
(2PCS)
Part
C
D
Part
STEP 1:
Attach the Curved
Slat (J) to the Seat (C) using 2x
1-5/8” Screws (O) as pictured.
STEP 4:
Attach Arms (A & B) to
the Front Legs (E & F) using 2x
2-3/8” Bolts (M) and secure with
Washer (P) and Nut (Q).
STEP 5:
Attach Back Panel (D) to
the Arms (A & B) using 2x 2-3/8”
Bolts (M).
Use 2x 1-2/5” Bolts (K) to attach
the Folding Brackets (G) to the
Back Panel (D).
Use 2x 2” Bolts (L) to attach
Folding Brackets (G) to the back
legs and secure with Washer (P)
and Nut (Q) as pictured.
Right
Left
Right
Left
G
Pa
rt
Part
H
J
Part
J.
N. 2-3/8” Bolt - 2Pcs
S.
J
O
O
O
M
M
M
P
D
N
N
N
K
K
K
L
L
L
L
P
Curved Slat
K:
1-2/5” Bolts (2PCS)
L:
2” Bolts (6PCS)
M:
2-3/8” Bolts (6PCS)
P:
Washer (6PCS)
Q:
Lock Nut (6PCS)
S:
Hand Wrench (1PC)
T:
Allen Wrench (1PC)
(1PC)
*IMPORTANT NOTE: DO NOT OVERTIGHTEN THE BOLTS*
STEP 2:
Attach Front Legs (E &
F) to the Seat (C) using 2x 2-3/8”
Bolts (M), one per leg as pictured,
and secure with Washer (P) and
Nut (Q).
E
F
M
M
M
M
P
Tighten all bolts and screws after
assembly is complete.
*Tip
: It helps to have a person hold the back panel (D
STEP 3:
Attach the Under-Seat
Beam (H) to the Seat (C) using
2x 2” Bolts (L). Attach the Back
Leg Cross Bar (I) between the
back legs using 2x 2” Bolts (L) as
pictured.
L
L
L
L
*Please place top
side up as shown
O:
1-5/8” Screw (2PCS)
R:
Philip Head Screwdriver (1PC)
Sanding Sponge for Cleaning
M
M
Part
Part
Back View
