background image

 

110-509 PSC/EN 

39 

Equipment Disposal (WEEE Directive) 

          or           

 

 

This equipment is marked with the crossed out wheeled bin symbol to indicate it is covered by the Waste 
Electrical and Electronic Equipment (WEEE) Directive and is not to be disposed of as unsorted municipal 
waste. 

Any products marked with this symbol must be collected separately, according to the 

regulatory guidelines in your area. 

It is your responsibility to correctly dispose of this equipment at lifecycle-end by handing it over to an 
authorized facility for separate collection and recycling. It is also your responsibility to decontaminate the 
equipment in case of biological, chemical and/or radiological contamination, so as to protect the persons 
involved in the disposal and recycling of the equipment from health hazards. By doing so, you will help to 
conserve natural and environmental resources and you will ensure that your equipment is recycled in a 
manner that protects human health. 

Requirements for waste collection, reuse, recycling, and recovery programs vary by regulatory authority 
at your location. Contact your local responsible body (e.g., your laboratory manager) or authorized 
representative for information regarding applicable disposal regulations.

 

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Содержание MX06S135












































Отзывы: