Polygroup SUMMER WAVES SKIMMERPLUS SFX1000-BS, Руководство пользователя

Страница: 14 / 18

MOTOR REPLACEMENT INSTRUCTION
7. Check the Motor Seal
4
from bottom side to make sure it at the original slot correctly.
Use left hand to hold the motor from Canister inside. Make sure the motor water outlet
align with Canister outlet direction. Then use right hand to tighten the Motor Seal Nut
1
like the arrow direction (One more people help will be easier for replacement).
IMPORTANT:
The Preferred Method Is To Drain Enough Water From The Pool First Then Dismount The Entire Skimmer System Before Replacement. If
User Prefer To Operate It On The Pool, Please Refer To Below Process. Please Note Incorrect Handling Method May Cause Water Leakage Between Canister
And Liner.
5. Remove the Motor Seal Nut
1
by turning according to the arrow direction.
Do not pull or push the canister as you can to avoid engagement damage
between canister and pool liner.
6.Disassemble Motor assembly
3
Be careful not to lose the rubber nozzle
2
3. Detach the Locking Ring and Diverter Fitting by anticlockwise turning. Insert the Return fitting plug (RF Plug) .
4. Remove Top Cover
5
, Strainer Basket , Filter Cartridge
7
, it is
advised to use a water container, such as a bucket shown with dotted
line in the illustration to collect the purged water.
1. Insert the Water Stopper into the water intake of pump. Push the Stopper to make it engage with Skimmer Seal Ring closely.
2
3
2. Unplug the power.
keyway between
motor and canister
left hand
Nozzle
2
(motor outlet)
Outlet of Canister. Make sure
align with motor outlet.
14