voices and outputs. It passes thru all the information that is not utilised by the unit
within the current setting to the MIDI output.
Thru – passes all the incoming information to the MIDI output.
Pitch-bend
:
No limit – will transmit the exact incoming values.
+/- 1-6 Octaves.
+/- 11-1 Semitones.
If the source instrument isn’t sending the Pitch Bend information by itself, set it manually in
a range of 6 octaves or 11 semitones up and down.
CC/CV Smoothing
– depending on the setting (Off, Low, Mid, High) all CV outputs that are
converted from CC messages can be smoothed out.
Gate view
– displays the outgoing triggered voices – beneficial to monitor those messages.
Factory Reset
– restore the device to its original manufacturer settings.
About
– display the firmware version.
Load/Save profile
– store and recall all the user settings made for different setups and
different scenarios.
Note: Besides the ability to save and load the parameters, Poly 2 autosaves the current configuration and
recalls it when the module is toggled on.
Panic!
– sometimes MIDI information can get stuck, use the Panic! Function to release all the
voices and reset the MIDI information status.
Important notes:
When scrolling the menu items, some MIDI information can be lost. For 100% accuracy
while playing, please keep Poly 2 in home screen (leave the menu).
If any strange MIDI behaviour over the USB host port occurs, switch to the MIDI DIN
which seems to be much more stable in general use.
https://www.youtube.com/embed/2mQCtD9hhCo?feature=oembed
Scenarios of use
