To delete all presets:
1.
If a call is connected, press
Near to choose a near-site video
source.
2.
Press
Preset on the remote control.
3.
Press
Delete to delete all presets.
Switching Between Full Screen Video and the Home Screen
Before the call connects, you see the near video in a small window on the
Place a Call (home) screen. When the call connects, the system
automatically shows the video in the whole screen. You can switch back to
the Place a Call screen during a call, for example, if you need to adjust a
user setting, and your system is configured to allow you to do so.
To see the video in the full screen:
>>
Press
Near on the remote control.
To see the Place a Call screen:
>>
Press
Home on the remote control.
Showing, Moving, and Turning Off the PIP
To show, move, or turn off the PIP during a call:
Press
PIP on the remote control to display the PIP on screen.
While the PIP has a yellow border, press
PIP repeatedly to move
it to different corners of the screen.
After a brief pause, the PIP border turns blue. Then, press
PIP to
turn the PIP off.
To swap the views shown in the PIP and the main screen:
1.
If the PIP is not showing, press
PIP on the remote control to
display the PIP on screen.
2.
Press
Camera and select the
Swap PIP icon.
During calls using a single monitor and the Dual Monitor Emulation feature
(split-screen viewing), without content, you can use the PIP button to scroll
through the following screen layouts:
1.
Near and far sites, same size, side by side
2.
Far site big, near site small
3.
Near site big, far site small
4.
Near site, full screen
5.
Far site, full screen
5
