Polycom VSX 8800, Буклет

Страница: 4 / 8

1. Press Near or Far to select either a near-site or far-site
camera.
2. Press the arrow buttons on the remote control to move the
camera up, down, to the left, or to the right.
3. Press Zoom to zoom out or in.
Setting and Using Camera Presets
Camera presets are stored camera positions that you can create ahead of
time or during a call.
To move the camera to a preset:
1. If a call is connected, press Near or Far to choose a near-
site or far-site camera or other video source.
2. Press a number on the remote control.
The camera moves to the preset position for the camera or other video
source.
To view your near-site presets (VSX set-top and component
systems):
>>
Press Preset on the remote control.
Icons for presets 0-9 are shown on the screen. The colored icons
indicate stored camera positions, and the gray icons indicate available
presets.
To store a preset:
1. If you are in a call, press Near or Far to choose a near-site
or far-site camera or other video source.
2. If you selected a camera that supports electronic pan, tilt, and
zoom, you can adjust the camera’s position:
ƒ
Press the arrow buttons on the remote control to move the camera
up, down, to the left, or to the right.
ƒ
Press Zoom to zoom the camera out or in.
3. Press Preset on the remote control.
4. Press and hold a number to store the preset position. To store a
double-digit preset, hold the second number down. Any existing
preset stored at the number you enter is replaced.
The system uses preset 0 as the default camera position.
4