Polycom VSX 7000s Series, Справочное руководство интегратора

Страница: 285 / 418

System Commands
4 - 209
prinumberingplan
Sets or gets the PRI numbering plan. This command is only applicable if you
have a PRI network interface connected to your system.
Syntax
prinumberingplan <get|isdn|unknown>
Feedback Examples
• prinumberingplan isdn
• prinumberingplan unknown
Comments
User interface screen location: System > Admin Settings > Network > ISDN
(page 3) : Numbering Plan
This screen is only accessible if you have a PRI network interface connected to
your system.
Parameter Description
get
Returns the current setting.
isdn
With this parameter, the numbering plan is identified to
the upstream switch as ISDN, and the number type,
which is either national or international, is determined
from the dialed phone number. If the dialed phone
number starts with the international dialing prefix that is
currently selected, the type is set to the international
and the prefix is removed from the number before the
number is sent to the upstream switch. Otherwise, the
number is marked as national and passed to the
upstream switch without modification.
unknown
This is the default selection. With this parameter, the
numbering plan and number type are sent to the
upstream as unknown, and the dialed phone number is
sent without notification. The
unknown
parameter is
preferred and should work with all properly configured
PBXs and with most telephone company switches. A
notable exception in North America is an ATT 5ESS
switch, which is provisioned with Accunet, or an ATT
4ESS switch. For these switches, set the numbering
type to ISDN.