Polycom VSX 7000s Series, Справочное руководство интегратора

Страница: 118 / 418

Integrator’s Reference Manual for the VSX Series
4 - 42
Feedback Examples
•
camera far 2
causes the remote terminal to begin sending its camera 2.
•
camera far move left
causes the far camera to start panning to the left.
•
camera near move zoom+
causes the near camera to zoom in.
• camera registered
• camera unregistered
• camera near 2
• camera far 1
• camera near source 2
tracking
Sets the tracking mode. Returns the current near or far
camera tracking mode when followed by the
get
parameter.
on
Turns on the near or far camera tracking mode. The
far-site system must have the option Far Control of
Near Camera enabled and auto-tracking turned on.
off
Turns off the near or far camera tracking mode.
to_presets
Turns on the near or far camera tracking to presets.
getposition
Gets the pan, tilt, and zoom coordinates of the currently
selected PTZ camera in the format of
pan tilt zoom
.
setposition “x” “y”
“z”
Sets the pan (
x
), tilt (
y
), and zoom (
z
) coordinates of
the currently selected PTZ camera. Camera PTZ
range:
-880
<=
pan <= 880
-300 <= tilt <= 300
0 <= zoom <= 1023
Note: Some D30 cameras might not be able to reach
the designed range limit. For example, although the
pan limit is 880, the camera might only be able to reach
860.
register
Registers to receive feedback when the user changes
the camera source. Returns the current camera
registration state when followed by the
get
parameter.
unregister
Unregisters to receive feedback when the user
changes the camera source.
Parameter Description