Polycom, Inc.
7
3
Installing the KWS8000 OAM
Program
This chapter describes how to install and configure the communications
settings for the KWS8000.
Connecting the KWS8000 to a Computer
Before you can use the OAM program, you need to connect the KWS8000 to a
computer using a null-modem cable.
The KWS8000 serial port is a 9-pin DSUB male connector for direct connection
between the computer and DMD.
Figure 3-1
Serial Connection Null Modem Cable
Note
The maximum length of the null-modem cable must not exceed five meters
(16 feet.)