KIRK Wireless Server 500 with CLIP – User Guide - 14096500-HD, Ed.8
9
3.
Press
√
.
The menu shows
” CLIP-Stack ”.
4.
Press the
<
key until
”Read/Write user data
” appears in the display.
5.
Press
√
. The Serial Number of the
MASTER
Handset appears in the display.
To enter serial numbers of the additional handsets:
6.
Press the
>
key, until an empty position has been reached (channel 1 – 7). If the position is
empty, the display shows:
” _________________”.
7.
Enter
the Serial Number of the new handset, e.g. 00077 01648224. (For KIRK Handsets you
can find the Serial Number on the label behind the battery or by pressing the service code
*99984*
√
/
OK
on the handset). Please note; the Serial Number
has
to be entered as
continuous characters.
8.
Press
√
.
9.
The chosen channel number appears in the display.
10.
Enter
the extension number.
11.
Press
√
.
The MASTER Handset has now registered new handset(s) with the corresponding serial
number(s) to the system. You can now subscribe the additional handset.
By pressing the
>
key, additional handsets can be registered according to the procedure as above
mentioned.
•
Press
MENU
to go back to standby mode.
4.5 Subscription of KIRK Handsets
1.
Power up the Handset by pressing the
OFF-HOOK
key.
2.
Press the
MENU
key
.
3.
Press the
<
key until
” LOGIN ”
appears in the display
.
Press
√
.
4.
Press
>
key until
“ SUBSCRIPTION CREATE “
appears in the display
.
5.
Press
√
. The handset starts searching for ”your” KIRK Wireless Server 500. When the handset
finds the system, a number appears in the display that should match the serial number on the
rear of the KIRK Wireless Server.
If the handset detects more than one system, an arrow appears in the bottom of the display,
indicating that you can press the
>
key. It is now possible to scroll between the numbers of
