KIRK Wireless Server 500 with CLIP – User Guide - 14096500-HD, Ed.8
7
4.0 Programming Handsets on KIRK Wireless
Server 500
4.1 Two Ways of Programming the KIRK Wireless Server 500
1.
Either through a
MASTER
Handset.
Please note that the Master Handset programming
can only be exercised by using a KIRK 3040 Handset or KIRK 40XX Handset.
2.
or through the
Administration Program
installed on the PC (Please refer to section
8.0
).
(Using the
Administration Program
allows subscription of any DECT GAP compliant
Handsets).
4.2 Registration of the Master Handset
When powering up the KIRK Wireless Server 500 it will automatically enter into registration
mode for a period of
15 minutes
. During this period you can subscribe the MASTER Handset.
The registration mode is indicated by a fast flashing green LED on the KIRK Wireless Server
1
.
It is now possible to subscribe the first handset.
(Will automatically be configured to channel 00).
1.
Power up the handset by pressing the
OFF HOOK
key.
2.
Press the
MENU
key.
3.
Press the
<
until “
LOGIN ”
appears in the display
.
Press
√
.
4.
Press
>
key once. “
SUBSCRIPTION CREATE
”
will appear in the display.
5.
Press
√
.
The handset starts searching for ”your” KIRK Wireless Server 500. When the handset finds the
system, a number appears in the display, which should match the serial number on the rear of
the KIRK Wireless Server 500.
If the handset detects more than one system, an arrow will appear in the bottom of the display
indicating that you can press the
>
key.
It is now possible to scroll between the numbers in the display by pressing either the
<
or the
>
key.
1
It is only possible to subscribe one MASTER Handset on each KIRK Wireless Server 500. The first handset
subscribed will automatically become the
MASTER Handset
.
