Polyaire Zonemaster ZoneTouch V2, Руководство по установке

Страница: 12 / 24

ZONEMASTER ZONETOUCH V2 ZONE CONTROL SYSTEM - Installation Manual
10
7) Recommended Commissioning Procedure
7.1 Setting Parameters
System parameters can be set up from ‘Installer Settings’ screen.
Follow the steps below to set required values. Touching button in the
setting process will go back to the home screen from any setting pages.
a) Touch on the home screen (Figure 3) to enter ‘Settings’ screen
(Figure 4).
b) On ‘Settings’ screen, touch button to show the keyboard for
entering the password of installer settings (Figure 5).
c) Enter the password of installer settings (Figure 6), the default password is
‘Polyaire’.
NOTE: The password is case sensitive. Maximum length for the password is
eight characters but it can also be blank.
Figure 3.
Figure 5.
Figure 4.
Figure 6.