Page 13
6. Naming Zones
The name of a zone is called
‘Zone_addr’
. For example, zone 1, which
has an address of 1, is called
‘Zone_1’
on its factory default. The names
can be customised as you prefer as follows:
1) At setting mode, press button until the
LCD displays the first zone naming, for example,
‘Z1 Name’ on the top line of the LCD. The second
line shows the current name of zone 1.
2) Press or button to select one of the
27 preset zone names for the zone.
3) To make changes to the preset selected name,
press button to move to the character that
is flashing.
4) Use or button to select the character
from the list as desired. There are 26 alphabets
in capital and normal case, 10 numbers and a
space in the list.
5) Press button to select the next zone
naming screen and follow steps 2 to 4 to
customise the name of the zone.
7. Damper on/off Test
1) Switch on the air conditioner.
2) Press button to turn each of the zones on or off to
check if the damper is correctly connected by feeling the air
at the outlet. Refer to User’s manual for the operation.
