36
Call Features
You can configure call features in one of three ways:
●
A system-level feature applies to all calls on the system, regardless which line a call is on. For
example, call waiting is a system feature.
●
A line-level feature applies only to calls on a specific line. For example, server-based Do Not Disturb
(DND) and centralized conference are line-based features.
●
Some features can have both a system feature version and a line feature version.
For example, you can provision Call Park as a system feature
for all calls and as a line feature for
each line for the SP services (SP1–SP8) and OBiTALK services.
For more information on call feature parameters, see the
Local Call Park
Local call park is independent of Service Provider-based call park services, and it allows users to park calls
on a VVX D230 base station and retrieve calls from any handset registered to the base station. Local call
park (if enabled) takes preference over Service Provider-based call park.
The D230 base station provides this feature without relying on the service provider’s call park service. This
feature provides 99 call parking slots (numbered 00 to 99), and a base station can hold up to 10 parked calls
at a time.
Enable Local Call Park
You can configure local call park on the VVX D230 base station to enable users to park and retrieve calls
locally.
To enable
local
call park:
1
In the system web interface, go to
DECT Wireless > System > Local Call Park
.
2
In the
Default
column, clear the check box for the
LocalCallPark
parameter.
3
In the
Value
column for the
LocalCallPark
parameter, select the check box to set this parameter
to True.
4
Click
Submit
.
5
Reboot your system when you complete your changes.
When local call park is enabled, local call park status is also enabled and a new status page is shown on
the system web interface at
Status – Parking Lot Status
that shows the list of parked calls.