Configuration and Management
15
To configure basic settings with IVR:
1
Dial
***
from the handset.
2
Enter the number for the configuration menu you want to access.
Integrated Voice Response Operations
Menu Selection
Setting
Description
1
Basic Network Status
System IP address and DHCP status.
2
Advanced Network Status
Information on the primary and back-up DNS
server and primary and back-up NTP server.
3
Set DHCP
Current DHCP value.
•
Press
0
to repeat the information.
•
Press
1
to enter a new value.
•
Press
2
to set the default value.
4
Set IP Address
Current IP address.
Note:
If you enter a new value (static IP
address), you disable DHCP.
•
Press
0
to repeat the information.
•
Press
1
to enter a new value.
•
Press
2
to set the default value.
5
Set Password
Current IVR password.
•
Press
0
to repeat the information.
•
Press
1
to enter a new value.
•
Press
2
to set the default value.
6
Software Update
The system plays one of the following
messages:
•
Software update available. Press 1 to
update software.
•
Software update not available.
If an update is available, press
1
to update the
software. The software update process starts
as soon as you hang up.
Warning:
Once the software upgrade process
starts, your base station’s power LED blinks
rapidly. Make sure the power and network
cable stay connected to the unit until the
process is complete.
8
Restore Factory Default
Restores the system to factory default
settings.
•
Press
1
to confirm the factory restore.
•
Press
#
to return to the main configuration
menu.
•
Press
# #
to exit the IVR system.