29
Open Doorway – Wood Frame – Part 2
Positioning the Poly
You will need some help with this step. After all the Wiggle Wire
Base has been attached, position the Poly Film over the End Frame.
Be sure to have leave excess Poly on all sides. You can always trim
the Poly closer after the installation is completed.
You may want to install a few 12
pieces of the Wiggle Wire here
and there to keep the large sheet of Poly temporarily in place.
This will also provide an opportunity to pre-stretch the Poly.
These 12
pieces can be reused to reinforce the corners after
all the Wiggle Wire is installed.
Install Wiggle Wire all around the End Frame, across the Lower Wood
Rail and around door opening.
Note: See page 30 for instructions on how to retain the Poly in the
Wiggle Wire Base using the Wiggle Wire.
If the Poly is installed on a cool day, it will expand when the outside
temperature warms. It may be necessary to retighten the sheet of Poly.
After all the Wiggle Wire is installed, use 12
pieces to reinforce
the corners. See details on page 30.
Pieces of Wiggle Wire to hold
Poly in place temporarily.
Stretch Poly to Side
Stretch Poly to Side
Trim Poly Film all sides and bottom leaving
a minimum of 1
of material on all sides.
