POLTI Vaporetto SMART 30_R, Инструкция по эксплуатации

Страница: 30 / 100

turning the adjustment knob (8); for this type
of surface we recommend Medium level of
steam.
5.4 Deactivate the steam lock (4)-(5) and
continue with steam delivery, pressing the
steam trigger on the handle of the steam
hose.
5.5 Pass the brush without cloth over the
surface to bring dirt to the surface.
5.6 Attach the supplied cloth to the floor
brush, locking it in place with the special
lever hooks (10).
5.7 Go back over the surface to collect the
dirt.
6. CLEANING CARPETS
6.1 Make sure that Section 1 has been
followed and connect the accessories as
indicated in Section 2.
6.2 Connect the extension tubes to the steam
hose and the floor brush to the extension
tubes.
6.3 Adjust the intensity of the steam by
turning the adjustment knob (8); for this type
of surface we recommend Medium level of
steam.
6.4 Ensure that the steam lock on the handle
is deactivated (4)-(5).
6.5 Attach the supplied cloth to the floor
brush, locking it in place with the special
lever hooks (10). Proceed rapidly and without
pressing over the carpet, running the brush
forward, backward and sideways without
pausing too long at the same point.
7. CLEANING GLASS, WINDOWS
AND TILES
7.1 Make sure that Section 1 has been followed
and connect the accessories as indicated in
Section 2.
7.2 Adjust the intensity of the steam by
turning the adjustment knob (8); for this type
of surface we recommend Medium level of
steam.
7.3 Ensure that the steam lock on the handle
is deactivated (5)-(6).
7.4 To clean windows and mirrors, steam the
surface thoroughly to dissolve the dirt. Apply
the window cleaner frame to the small brush
(14) and go back over the surface to
eliminate the dirt, without dispensing steam.
The extension hoses can be connected to the
handle to reach high surfaces.
7.5 To clean tiles, attach the cap to the small
brush and pass over the surface, dispensing
steam, in order to eliminate the dirt. The
extension hoses can be connected to the
handle to reach high surfaces.
8. CLEANING UPHOLSTERY
(mattresses, sofas, car interiors,
etc.)
8.1 Make sure that Section 1 has been
followed and connect the accessories as
indicated in Section 2.
8.2 Connect the small brush to the steam
hose.
8.3 Attach the cap to the small brush.
8.4 Adjust the intensity of the steam by
turning the adjustment knob (8); for this type
of surface we recommend Minimum level of
steam.
8.5 Ensure that the steam lock on the handle
is deactivated (4)-(5).
8.6 Press and hold the steam trigger on the
handle of the steam hose and pass over the
surface.
9. CLEANING BATHROOM
FIXTURES, GROUTING AND
KITCHEN WORKTOPS
9.1 Make sure that Section 1 has been
followed and connect the accessories as
indicated in Section 2.
9.2 Adjust the intensity of the steam by
WARNING: Before cleaning leather or
fabrics with steam, consult the
manufacturer’s instructions and always
carry out a test on a hidden part or on a
sample of the material. Allow the steamed
part to dry to make sure that no changes in
colour or deformations have occurred.
WARNING: To clean glass surfaces during
cold weather, preheat the windows starting
to vacuum from a distance of about 50 cm
from the surface.
If the carpet is very dirty or saturated with
cleaning products, do not to insist too much.
Results will be evident only after a few uses
of Vaporetto.
Before removing the cloth from the brush,
wait a few minutes to allow the cloth to cool.
WARNING: Before cleaning fabrics with
steam, consult the manufacturer’s
instructions and always carry out a test on a
hidden part or on a sample of the material.
Allow the steamed part to dry to make sure
that no changes in colour or deformations
have occurred.
E
N
G
L
IS
H
| 30 |