14. TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
The plate on the iron is
cold.
The device became unplugged
from the electric plug.
Plug the appliance into the electric socket.
Steam does not come out
of the iron.
Steam adjustment set to the
zero position (=steam OFF)
.
Increase the steam adjustment (3).
Water reservoir empty.
Fill the water tank.
When
the
Steam
Jet
function is activated no
steam comes out or only a
small amount comes out.
There is not enough water in
the tank.
Fill the water tank.
First use.
Wait until the 3 or Max temperature level
has been reached and press the button
(6)
several times until steam comes
out.
When the spray function is
activated no water comes
out or only a small amount
comes out.
There is not enough water in
the tank.
Fill the water tank.
First use.
Press the button
(8)
repeatedly until
the water spray comes out.
The appliance does not
iron well.
The wrong temperature has
been selected.
Select the proper temperature for the
type of fabric to be ironed.
Water comes out of the
iron instead of steam.
The iron is still cold.
Wait until the temperature light stops
flashing and remains on.
A temperature level of 1 or 2
has been mistakenly selected.
Select the 3 or MAX temperature level.
White impurities come out
of the iron.
“Hard” water has been used.
Perform the Self Clean cleaning cycle.
Traces of water remain on
the garments.
The
ironing-board
lining
is
impregnated with water.
Check that the ironing board is suitable (a
board
with
a
grill
that
prevents
condensation).
The temperature is set to •• / •
/ MIN with steam adjustment
activated.
Set the temperature to 3 or MAX or set
the steam to the zero position (=steam
OFF)
(see chapter 5).
If problems persist or are not listed above, please contact a Polti Authorised Service Centre
(www.polti.co.uk for the updated list) or contact Customer Services.
E
N
G
L
IS
H
| 25 |
