4. USE IN “PORTABLE” MODE
Forzaspira SE600 MODULAR can be used as
a portable vacuum cleaner to deeply clean
sofas, upholstery and car interiors.
4.1 Use the central body for all suction clea-
ning operations.
4.2 Remove the brush by pressing the locking
button (8).
4.3 Detach the handle tube from the central
body by pressing the button (9).
4.4 Press the power switch
(6).
4.5 Adjust the suction power as explained in
Section 2 by pressing the +/– button on the
central body handle (7).
4.6 Attach the lance accessory for precision
cleaning, or the 2-in-1 nozzle for fabrics and
upholstery (14).
5. USE IN “EXTENDIBLE” MODE”
Forzaspira SE600 MODULAR can be used as
a portable vacuum cleaner with an extension
to reach the most difficult points, such as the
ceiling or shelves.
5.1 Remove the brush by pressing the locking
button (8).
5.2 Detach the handle tube from the central
body by pressing the button (9) on the hand-
le then open the upper cap (10).
5.3 Move the handle cursor (11) to take out the
attachment system.
5.4 Attach the handle tube (12) to the nozzle
of the central body.
5.5 Attach the lance accessory for precision
cleaning, or the 2-in-1 nozzle for fabrics and
upholstery (13).
5.6 Plug the power cable in to an appropriate
mains socket (5).
5.7 Press the power switch
(6).
5.8 Adjust the suction power as explained in
Section 2 by pressing the +/– button on the
central body handle (7).
6. USING ACCESSORIES
UNIVERSAL BRUSH
The universal brush is the ideal accessory for
cleaning all types of floors, carpets and wall-
to-wall carpets. It is equipped with LED lights
that turn on when the appliance is switched on
an ideal solution to find hidden dirt even more
effectively.
PARQUET BRUSH
The parquet brush is designed to clean deli-
cate surfaces and therefore has bristles and
wheels in material specially selected to avoid
damaging such surfaces.
LANCE
The lance is recommended for thorough va-
cuum cleaning of hard-to-reach spots such as
skirting boards and folds in sofas, armchairs,
upholstered furniture and car upholstery.
2-IN-1 SUCTION NOZZLE WITH REMOVABLE
BRUSH
The 2-in-1 nozzle is recommended for clea-
ning upholstered surfaces such as the joints
of sofas, armchairs, mattresses, car uphol-
stery, etc.
The bristle frame can be inserted by sliding
the frame guides onto the base of the nozzle
to clean drawers, bookcases and furniture
(15). Complete the above in reverse order to
remove it.
7.
EMPTYING,
CLEANING
AND
MAINTENANCE OF THE DUST COL-
LECTOR
7.1 Switch the appliance off by pressing the
power switch
. Disconnect the power sup-
ply cable from the mains.
7.2 Detach the dust collector by pressing the
relevant release button (16).
7.3 Turn it anti-clockwise to unlock it then re-
move the tank filter, aligning the filter mark
with the mark on the filter unit (UNLOCK) (18)
7.4 Remove the filter unit.
7.5 Empty the dust collector. If it is very dirty,
rinse it under running water.
7.6 Remove the HEPA filter from the filter unit
(19).
7.7 Eliminate any excess dust and dirt from
the filter.
7.8 Wash the filter unit under running water
to remove all the residual dirt then dry it.
7.9 Wash the HEPA filter regularly under run-
ning water (do not use detergents). Leave it
to dry for 24 hours, away from direct sources
of heat.
7.10 After cleaning the HEPA filter, put it back
into the filter unit by aligning the filter mark
with the mark on the filter unit (LOCK) (18),
inside the dust collector (19).
7.11 Attach the dust collector to the vacuum
cleaner (17).
With the universal brush attaached, the
upright remains in the vertical position.
Dry the dust collector before reattaching it.
E
N
G
L
IS
H
| 20 |
