Fire detecti on line module MLD-61/62
The MLD-61/62 enables to connect of two fire detection lines/
loops. The MLD-61 is equipped with 27 V line voltage converter
which enables to power up to 4 detection lines/loops. In order
to minimalize the current consumption and to expand the number
detection lines/loops, it is recommended to use one MLD-61 toge-
ther with one MLD-62. Each detection line can support up to 250
adresseble line elements.
Input/output module MKS-60
The module is equipped with:
- two potential-free relay outputs with max load 1 A/30 V,
- two potential outputs (signaling lines) with 0,5 A/24V,
- two low voltage monitoring inputs.
The module is fail-safe ready and the position of the relay or its ope-
ration in case of fault can be programmed. Inputs and outputs are
equipped with external line continuity monitoring circuits. Monito-
ring input can be programmed as 2-states (quiescent and action)
or 3-states (quiescent, action 1 and action 2). States are identified
by different resistance of the line.
Signaling lines module MWS-60
Monitoring inputs module MWK-60
High voltage relay outputs module MPW-61
Relay outputs module MPK-60
The module is equipped with 4 signaling lines with 0,5 A/30 V. Out-
puts are equipped with external line continuity monitoring circuits.
The module is equipped with 8 resistance monitoring inputs. In-
puts are equipped with external line continuity monitoring circu-
its. They can be programmed as 2-states (quiescent and action)
or 3-states (quiescent, action 1 and action 2). States are identified
by different resistance of the line.
The module is equipped with:
- two high voltage potential-free relay outputs with 5 A/230 V AC,
- two monitoring inputs.
Inputs and outputs are equipped with external line continuity mo-
nitoring circuits. Monitoring input can be programmed as 2-states
(quiescent and action) or 3-states (quiescent, action 1 and action 2).
States are identified by different resistance of the line.
The module is equipped with 4 relay potential-free outputs with
current load up to 1 A/30 V. The module is fail-safe ready and the
position of the relay or its operation in case of fault can be program-
med. Outputs are equipped with external line continuity monito-
ring circuits.
Printer MD-60
The module is equipped with the controller and the thermal printer
mechanism.
Conventi onal lines module MLK-60
The module is equipped with 8 conventional lines to connect co-
nventionl detectors and manual call points.
Conventi onal detecti on line module MLK-61
The MLK-61 allows to connect up to eight conventi onal detecti on li-
nes/zones. Each conventi onal detecti on line can operate with up to
32 detectors or 10 manual call points.
All these lines are supervised for conti nuity and short-circuit.
