3
Point the remote control of the TV at the remote
control sensor of this unit and press the remote
control button to be learned (e.g. the button to
increase the volume) once.
If learning is successful, the rightmost status LED blinks in
green three times.
If learning is unsuccessful, the rightmost status LED blinks
in red three times. Repeat steps 2 and 3 if this happens.
0
When the status LEDs blink in white again, press the TV remote
control button (e.g. the button to increase the volume) once
more.
4
To learn a new function, repeat steps 2 and 3 with
the next function.
5
Press and hold the main unit’s
d
for 3 seconds or
more.
The rightmost status LED blinks white three times and
indicates that the remote control learning mode is
completed.
The unit exits remote control learning mode.
6
Confirm that the operation (e.g. increasing the
volume) can be performed on this unit with the TV
remote control.
0
To delete all learned data, press and hold
d
on the sound bar for 10
seconds until all status LEDs blink in purple five times.
0
Operations cannot be performed with the remote control learning
function during the Deep standby.
0
Other operations cannot be performed when in remote control learning
mode.
0
Remote control learning may not be possible depending on the type of
TV remote control.
32
