Polk Mono Signa S4, Руководство пользователя

Страница: 31 / 46

Operating this unit using the remote
control of a TV
There are three ways to operate this unit using the remote
control of a TV.
0
HDMI control function
Connect this unit to a TV that supports the HDMI control
function with an HDMI cable and enable the HDMI control
setting on the TV to perform basic operations on this unit
(changing the input source, turning the power on and off,
adjusting the volume) with the remote control of the TV.
Refer to “HDMI control function” for more information about
the HDMI control function.
(
v
p. 40)
0
Remote control preset function
This unit is preset such that you can adjust the volume using
the volume adjustment button on the remote controls for the
televisions of major manufacturers. This is useful when the
television you are using does not support HDMI control, or
when you connect to a television that does not have an HDMI
connector.
0
Remote control learning function
If your TV does not support the HDMI control function and
Remote control preset function, use this unit’s remote control
learning function. This enables you to operate this unit with
the remote control of a TV. (“Using the remote control
learning function” ( v p. 31))
o
Using the remote control learning function
1
Press and hold the main unit’s
d
for 3 seconds or
more.
Among the LEDs on the status display, one white LED light
moves back and forth from left to right and indicates that
the remote control learning mode has started.
2
Point the remote control of this unit at the remote
sensor of this unit and press the remote control
button to be learned (e.g. VOL +) once.
All status LEDs blink in white.
.
Approx. 30 cm
Contents Connections Playback Settings Tips Appendix
31