Politec PARVIS HYBRID SMA, Техническое руководство, Страница: 20 / 24

POLITEC s.r.l. | Manual PARVIS HYBRID SMA – Ver. 1.2 20
9.
Exit the function by repressing the ALIGNMENT TEST button for about 3 seconds on both optics (TX-
RX) ensuring that the orange LED TEST is shown in original condition.
10.
When finished, remove the shade that acts as a attenuator, with the certainty of having found the
optimum value.
Once the alignment of all the beams is finished, put in OFF the DIP 10 on the motherboard to deactivate the
programming mode indicated by the LED turns off.
For the next 30 seconds the barrier will sound continuously in case of alignment not effective or
interruption of a beam; correct the orientation of the columns so that the buzzer emits no longer any sound.
N.B.:
SE IL LED DI TEST CONTINUA A LAMPEGGIARE VELOCEMENTE DURANTE IL
NORMALE FUNZIONAMENTO SIGNIFICA CHE ESISTE UNA FONTE DI DISTURBO
INFRAROSSO ( ALTRA BARRIERA, FOTOCELLULA CANCELLO, …) CHE NON
PERMETTE IL CORRETTO FUNZIONAMENTO DELLA BARRIERA.
PULSANTE
DI TEST
LED
ARANCIONE