Politec PARVIS HYBRID SMA, Техническое руководство, Страница: 15 / 24

POLITEC s.r.l. | Manual PARVIS HYBRID SMA – Ver. 1.2 15
9. SETTINGS & FUNCTIONS
DIP SWITCHES
The board has Dip Switches to set different functions:
4 DIP SWITCH TX
1
TEST In ON position goes in test for alignment. The TEST LED start blinking.
2
/ Not utilized
3
BEAM ON It puts in test all TX during alignment (DIP 1 ON). Test LED fixed ON.
4
BEAM OFF It puts OFF all TX during alignment (DIP 1 ON). Test LED fixed ON.
ON
1 2 3 4 5 6 7 8 9 10
Ex.: Function AND 1-2 with 6 beams
10 DIP SWITCHES RX
1
AND At least 2 optical must be interrupted to give alarm
2
AND 1-2 AND function only for 1st and 2nd beam, usefull in case of growing grass
3
BEAM 3 First 3 RX are active
4
BEAM 4 First 4 RX are active
5
BEAM 5 First 5 RX are active
6
BEAM 6 all RX are active
7
S. LOW FOG disqualification active
8
A. CRAWL
ON - Anti crawling active. In this condition if the first beam (lower) is interrupted for
more than 2 seconds, it will generate an alarm, independently of its configuration
(i.e. AND)
9
AMK /
10
TEST Put in ON to activate the TEST