Polecam AutoPod 510, Руководство пользователя

Страница: 6 / 11

Page 6
Operation continued...
Connecting your AutoPod
Plug in the all cables before plugging in the power cable as per the set-up diagram.
Remember:
Ensure that all connections are made before switching on any power; failure to do so may result in the system
needing to be re-set and/or calibrated for effective and accurate operation
Controlling your AutoPod
The AutoPod can be controlled by the foot pedals or the hand control unit interchangeably.
To move the AutoPod simply press the pedal or hand controller and the AutoPod will continue to move up or
down until it receives another signal to stop.
Your AutoPod hand control unit will allow you to store 3 pre-set positions. To store a position, move to the
selected height required and stop. Press the “S” button followed by one of the three preset keys marked by
“. / .. / … “ This stores the height positon. You can then drive the AutoPod up and down.
By pressing the a pre-set key twice, the AutoPod with move to the previously stored position.
NOTE: Pre-set positions cannot be accessed with the foot control pedal.
/ 110v AC