Polecam AutoPod 510 Скачать руководство пользователя страница 2

Page 2

Safety

Water, Moisture and Dust

WARNING!  The product is not intended to be used in wet or damp conditions. Protect 

against moisture and dust. The presence of electricity near water can be dangerous.

Ventilation

CAUTION!  The product may get warm. Do not cover. Allow sufficient ventilation and airflow 

around the product to ensure reliable operation

Operating environment

CAUTION!  The product should not be used outside the operating limits. Refer to the product 

technical specifications for the product operating limits regarding temperature, weight etc.

Cleaning

WARNING! Risk of electric shock!  Always disconnect and isolate the product from all sources 

of power before cleaning.

CAUTION! Do not use abrasives, wire brushes or chemicals to clean the product. Clean with a 

soft dry cloth.

Maintenance

WARNING!  Apart from regular cleaning, the product has no user serviceable parts and 

should not be opened by anyone other than Polecam authorised technicians.  Care should 

be taken to regularly inspect all cables and accessories for signs of damage, wear and tear. 

Any damaged cables, connectors or accessories should be replaced with Polecam authorised 

replacements. If in doubt, contact: [email protected] who will be able to advise you.

The fitting of non-approved parts or accessories, or carrying out of non-approved alterations 

or servicing can be dangerous and could affect the safe operation of the product. It may also 

invalidate the terms and conditions of the product warranty.

Working with Robotic equipment

The equipment is operated remotely and as such can move suddenly without warning. No audible warning 

will be given as it is counter-productive to the broadcast environment. 

It is recommended that only trained personnel be allowed to enter or work within the active operating areas 

where remotely operated robotic equipment is located.  The recommended safe operating distance is a          

minimum of 1M (3ft)

Содержание AutoPod 510












Отзывы: