Polecam AutoPod 510, Руководство пользователя

Страница: 5 / 11

Page 5
Lid Insert
1x Lightweight adjustable base (fitted with “V”
quick block base connector
1x Operators manual
Top Tray
1x Foot pedal contoller
1x Hand/Desk Controller
1x Mains PowerCon cable
1x Elevation unit cable (
2x if dual system is supplied)
Bottom Tray
1x AutoPod control unit (ACU)
1x Elevation unit
(2x if dual unit is supplied)
- each
fitted with 1x “V” quick in line connector with
inset XLR and 1x “V” quick block base
connector
1x “V” quick connector Camera mounting plate
2x Extension roads (250mm long)
1x 100mm Riser bowl adapter
1x UK Mains 2m IEC cable
1x US Mains 2m IEC cable
1x Euro Mains 2m IEC cable
Leg connection end of ACU
Operation
Getting Started
Before you start using your AutoPod system, you must familiarise yourself with the full list of components,
their features and functions
What is in the box
The AutoPod is supplied and packaged in a protective roll-along case with foam inserts - one of which (top
tray) is removable.
IMPORTANT:
Ensure that all connections are made before switching on any power; failure to do so may result in the
system needing to be re-set and/or callibrated for effective and accurate operation
See connection set-up diagram on next page - do not apply power until configured
NOTE!
When operating the Autopod with a single elevation unit, the unit should be plugged into “ LEG1 “ .
Leg 2 is not active when running a single Elevation unit.