Polartec Heat Blanket, Инструкция по эксплуатации

Страница: 8 / 13

Using the Wireless Remote Control
1
. Rotate the On/Off dial clockwise to turn the blanket ON. The base unit will
beep. A red light will illuminate on the base unit and glow steadily. If the
room is dark, the backlight on the remote will be visible and will glow for
3
seconds.
2
. Adjust the dial to change the temperature to any of
6
levels.
• Rotate all the way clockwise for highest heat level and all the way counter-
clockwise to turn the power OFF.
• Whenever an adjustment is made or the illumination button is pressed,
the base unit will beep.
• The backlight will glow for
3
seconds. The amount of light you see is propor-
tional to the heat level selected. The backlight is tuned to be seen in a dark
bedroom environment without causing uncomfortable glare.
• Pressing the illumination button gently lights the remote for
3
seconds so
you can check your heat level. If the
10
-hour automatic shut-off time limit is
reached, press the illumination button to restart the blanket while you are
still in bed.
3
. Turn the On/Off dial counter-clockwise to turn the blanket OFF.
Note: The base unit has three lights on it. One amber and two red lights are
located on the top surface. When the blanket is plugged in, the amber light will
be on. When the blanket is on, the red lights will be lit and will blink when the
temperature is changed.
Illumination Button
Backlight
On/Off Dial
Color-Coded
Snap-on Base
Off Position
Max Power
Position
8
INSTRUCTION MANUAL OP 8/20/01 10:45 AM Page 6