Polaroid SPd 360, Руководство пользователя

Страница: 8 / 16

English 9
to another meaning fine adjustment may
be necessary. The white balance menu
allows you to optimise the camera to
match your lighting conditions as follows:
a Enter the main menu by pressing the menu
on/off button. You will see the main menu
(12f) displayed on screen.
b Check the status icon in the top right cor-
ner of the screen
(12e) which indicates
which white balance calibration method is
currently in use. To alter procede to the
next step.
c Use the down button to highlight the set
up icon
(12f3) as shown and press select.
d In the set up menu (12g) , use the up and
down buttons to highlight the white bal-
ance icon
(12g1) and press the select but-
ton.
e Selecting the pre-set white balance icon
(12?) allows you to define a pre-set colour
temperature to suit your particular lighting
set up. The temperature ranges vary
depending on whether flash or flood light-
ing has been selected.
f Selecting the one step white balance icon
... procedure to be defined.
h Alternatively adjustment of the colour com-
pensation controls on the rear panel of the
printer can optimise printer performance to
match film output. Note that these con-
trols do not alter white balance in any way.
Menu lock function
After calibration, you may wish to disable
the set up menu to avoid accidental adjust-
ment of system settings.
a To activate this function, press and hold
the menu button and live/freeze button
(21) simultaneously for 3 seconds on the
camera.
b Note that the set up icon in the main menu
is now greyed out and not accessible using
the up/down buttons.
c To unlock the set up menu, repeat the but-
ton press sequence described above. Note
that this function will remain effective if
power is removed from the system.
Reset function
To restore the camera settings to pre-set
factory default state simultaneously press
the print button and print format button
whilst pressing the live/freeze button
(22)
on the camera for a duration of 2 seconds.
Note that if the colour compensation con-
trols on the rear panel of the printer have
been adjusted they must be manually
reset.
Printer calibration procedure
A periodic print head calibration is recom-
mended to ensure optimal printer perfor-
mance. This operation should be
performed once per week and will only
take a few minutes.
a Press and hold the print button and print
format button simultaneously
(23) whilst
powering up the system.
b You will see both the film mode indicators
display green for the duration of the cali-
bration process.
c The process takes approximately two min-
utes after which the printer is ready for
normal use.
Important: Light is emitted from the print
head during this procedure. The dark slide
must be in position to stop any accidental
exposure of the film.
Test print mode
An internal colour test chart (24) can be
generated and printed to verify the correct
function of the printer. Press the print but-
ton and hold for a few seconds during
power up and the test chart will be
exposed on to the film.