Polaroid SPd 360, Руководство пользователя

Страница: 3 / 16

4 English
1 Getting started
The SPd360 is a still digital based imaging
system which allows you to quickly and
easily take instant photographs to meet a
variety of photo-identification needs. This
guide describes all the features of the
SPd360. It takes you from unpacking the
boxes to setting up the system and trou-
ble-shoots any problems you may have.
All bracketed numbers refer to the dia-
grams in the fold out cover located at the
end of the manual.
Unpacking
System will arrive in 2 boxes as follows
a Camera, camera cable, user guide and grey
card.
b Printer, film holder, power supply, mains
cable and Polaroid film.
Carefully unpack the contents of both
boxes.
Camera parts (1)
a Preview screen
b Hot shoe
c Lens
d Live/freeze button
e Print format / down button
f Menu on / off button
g Print / up button
h
Tripod mount point
i Neutral density filter
Printer parts (2)
a Power switch
b Film holder
c Locking mechanism
d Control panel
e Power supply
f Dark slide
g PC parallel connector
h Colour compensation controls
i Power inlet
j SP camera connector
k
VGA connector
l Flash X-sync connector
Connecting up
Important: Switching on the printer with
the travel bracket in place may damage the
printing mechanism. Ensure the travel
bracket has been removed
(3) from the
printer before powering up the system.
Store the travel bracket and locking screw
in a safe place for future shipping of the
printer.
Use diagram
(4) to connect up the SPd360
system
a Printer
b Camera
c Power supply
d Mains power
e Optional external flash
f Optional monitor - see section 5
The camera can be either tripod mounted
or hand held
(5) . Sit the printer on a
nearby work surface. Power up the sys-
tem by switching the power switch on the
rear panel of the printer.
Attaching the film holder
a
Place the film holder on the opening on the
top of the printer so that it’s retaining
flanges align with the locking mechanism
on the printer
(6) .
b Lock the film holder in place by sliding both
retaining bars in the direction shown
(7) .
Loading a fresh film pack
a Use only Polaroid colour and / or black &
white peel apart film
b Open the film holder by pulling down the
ends of the latch and lifting the cover.