Polaroid onestep 2, Руководство пользователя

Страница: 13 / 73

User Manual
22
User Manual
23
Customer
Support
The Polaroid Originals Customer
Support Team is always more
than happy to hear from you. Get
in touch using the contact details
provided. For more detailed and
up-to-date information, visit
polaroidoriginals.com/help
USA/Canada
usa@polaroidoriginals.com
+212 219 3254
Europe/Rest of World
service@polaroidoriginals.com
00 800 577 01500
Impossible B.V.
P.O. Box 242
7500 AE Enschede
The Netherlands
Technical
Specifications
General
Dimensions
150mm (L) ×111mm (W) ×97mm (H)
Weight
460 grams (without film pack)
Operating Temperature
40–108°F / 4–42°C, 5–90%
relative humidity
Compatible Film
Polaroid Originals i-Type and 600
type film in both Color and Black &
White, including Special Editions.
Battery
High performance lithium-ion
battery, 1100mAh, 3.7V nominal
voltage, 4.07Wh
Materials
Outer shells
Polycar ABS plastics
Lens
Optical grade polycarbonate
lens, coated
Shutter system
Custom design using precision
step motor
Optical System
Lens
Fixed focus lens
Focal length
106mm
Field of view
41 degrees vertical,
40 degrees horizontal
Flash System
Vacuum discharge tube strobe
• Power consumption varies depending
on the environment the device is used in
and how the device has been stored. Used
immediately after full charge, the battery
will power the processing of up to 20 film
packs with flash exposures. Due to the
high energy requirements of the flash, we
recommend charging the camera fully
before every session for best results.
• Once the battery energy level falls below
a certain level, the device will no longer
process film. The LED will blink and signal
when it needs to be recharged. This is to
avoid a photo getting stuck as it is being
processed through the roller system.
• The rechargeable battery is not fully
charged at the time of purchase. Charge
the battery fully with the USB charging
cable (provided). This usually takes 1-2
hours (can vary depending on usage).
• The supplied battery charging cable has
been tested to work with the Apple iPhone
power adaptors. While it can be used in
other USB ports e.g. computer, USB power
adaptors, TVs, cars etc., correct operation
cannot be guaranteed.
• When the device is no longer in use,
please recycle it properly.
Usage Environment
• To protect the high-precision technology
contained in this device, never leave the
camera in the following environments
for extended periods of time: high
temperature (+42°C/108°F), high
humidity, places with extreme changes
in temperature (hot and cold), direct
sunlight, sandy or dusty environments
such as beaches, damp places, or places
with strong vibrations.
• Do not drop the device or subject it to
severe shocks or vibrations.
• Do not push, pull or press on the lens.
Safety Information
Caution
risk of electric shock
—
do not open
/
disassemble the motorized roller system
• Do not disassemble the device. Incorrect
reassembly can cause electrical shock if
the device is used again.
• Do not immerse the device in water or
other fluids.
• Do not operate the device in a high
humidity environment or very dusty
environments.
• Do not attempt to tamper with, adjust or
remove the battery and/or the electronics
located below the rollers behind the
device’s film door.
• Do not attempt to remove the door itself
as it is connected electronically to the
body of the device. Doing so is unsafe, will
likely damage your device, and will void
your warranty.
• Do not insert metal objects into the
device.
• Do not insert any objects into the rollers
or gears.
• Keep small children and infants away from
device to avoid them being injured by the
device’s moving parts.
• Do not use or store the device near any
heat source or any type of equipment
that generates heat, including stereo
amplifiers.
• Do not use the device near flammable or
explosive gases.
• Do not charge the device if you notice any
unusual odors, noise or smoke.
• Do not attempt to disassemble the film’s
battery or modify it in any way (if using
600-type film). If battery fluid gets in
your eyes, immediately rinse your eyes
with fresh, cold running water and seek
medical attention immediately.
Battery and Charger
• This device uses a custom lithium-ion
battery that is non-removable and
mounted inside the camera body.
No other type of battery can be used.
Battery replacement can only be done
by authorized service centers. The battery
will provide many years of service if
properly used.