6
card slot). Push the SD card until you hear a slight clicking sound. This indicates the SD
card has been inserted correctly.
Note
:
After the camera is powered on, an SD icon will appear on the LCD display. If you do not
see the SD icon on the display, please check if the card was inserted properly.
Make sure the SD card is not locked (check the lock switch on the side of the SD card). If
the SD card is locked this will prevent the camera from saving captured photos to the SD card.
3)
Power On
Press the
POWER
button to turn on the camera.
After powering on your camera for the first time, you will be prompted to select a language for the
camera. The Language selection menu appears. Select the language of your choice by pressing
the
UP
and
DOWN
direction control buttons. Then press the
OK
button to confirm the selection.
The next step in the initial camera setup is to set the date and time on the camera.
Set the Date and Time as desired by pressing the
RIGHT
and
LEFT
direction control buttons to
choose the specific setting and the
UP
and
DOWN
buttons to change each setting.
Once you have completed setting the time and date, press the
OK
button to confirm the selection
and finish the camera setup.
