background image

www.polaroid.com 

2

Important Service and Safety Information 

                                                                                                                           

Prior to using this service manual, please ensure that you have carefully 
followed all the procedures outlined in the user's manual for this product.

 

 

(1)

 

Read all of these instructions. 

(2)

 

Save these instructions. 

(3)

 

Follow all warnings and instructions marked on the product. 

(4)

 

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners; use a 

damp cloth for cleaning. 

(5)

 

Do not use this product near water. 

(6)

 

Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the 

product. 

(7)

 

Slots and openings in the cabinet and the back or bottom are provided for ventilation, to ensure reliable operation 
of the product and to protect it from overheating, those openings must not be blocked or covered. The openings 

should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should 

not be placed in a built-in installation unless proper ventilation is provided.  

(8)

 

This product should be operated from the type of power source indicated on the marketing label. If you are not 

sure of the type of power available, consult your dealer or local power company. 

(9)

 

This product is equipped with a 3-wire grounding type plug, a plug having a third (grounding) pin. This plug will 
only fit into a grounding-type power outlet. This is a safety feature, if you are unable to insert the plug into the 

outlet, contact your electrician to replace your obsolete outlet. Do not ignore the purpose of the grounding-type 

plug. 

(10)

 

Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord. 

(11)

 

If an extension cord is used with this product, make sure that the total of the ampere ratings on the product 

plugged into the extension cord does not exceed 15 ampere. 

(12)

 

Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points 

or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product. 

(13)

 

Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous 

voltage points or other risks. Refer all servicing to service personnel. 

(14)

 

Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following 
conditions:

 (0)

 

a.

 

When the power cord or plug is damaged or frayed. 

b.

 

If liquid has been spilled into the product. 

c.

 

If the product has been exposed to rain or water. 

d.

 

If the product does not operate normally, when the operating instructions are followed. Adjust only 

those controls that are covered by the operating instructions since improper adjustment of other 
controls may result in damage and will often require extensive work by a qualified technician to 

restore the product to normal operation. 

e.

 

If the product has been dropped or the cabinet has been damaged. 

f.

 

If the product exhibits a distinct change in performance, indicating a need for service.

  .

 

 

Содержание FLM-4034B





















































Отзывы: