Setting the Date and Time Imprint
Page 2
This feature allows you to include an imprint of the date and time in the picture. Do this by using the MODE,
SELECT and SET buttons located on the film compartment cover.
Use the tip of a ballpoint pen to depress the
buttons.
Choosing the mode
Choose the MODE by repeatedly pressing
the MODE button until you reach the
desired format. Each time this button is
pressed, the format sequence will change
as shown at left.
No Imprint in Picture
Month, Day and Year
Day, Month and Year
Year, Month and Day
Day and Time
Example: Setting the Year, Month and Day
To set the Year:
1. Press the SELECT button until the Year (YY) blinks.
2. Press SET repeatedly until you reach the desired Year.
To set the Month:
1. Press the SELECT button until the Month (MM) blinks.
2. Press SET repeatedly until you reach the desired Month.
To set the Day:
1. Press the SELECT button until the Day (DD) blinks.
2. Press SET repeatedly until you reach the desired Day.
Note: One 3 V lithium battery (CR2025) powers the
display. If the display becomes too dim to read, the
battery should be replaced.
