9
2.3 I Electricity supply connecti on
To prevent all risks of electrocuti on, fi re or serious injury, please comply with the following
instructi ons:
• Use of an electrical extension is prohibited when connecti ng the control box.
• Make sure that the socket can be easily accessed at all ti mes and is protected from rain or
splashes.
• The control box is splash-proof, but must not be immersed in the water or any other liquid.
It must not be installed in a fl oodable area; keep it at least 3.5 metres away from the edge of
the pool and avoid exposing it to direct sunlight.
• Place the control box near the socket.
•
Connect the fl oati ng cable into the control box
(see
fi gure ).
•
Push the connector in unti l you hear 2 clicks
(see
fi gure ). Make sure the connector is suffi ciently pushed into place.
If it is not, repeat the operati on.
•
Connect the power cord
(see
fi gure ). Only connect the control box to a power outlet protected by a 30 mA
maximum residual current device
(if in doubt contact a qualifi ed technician).
•
To disconnect the fl oati ng cable from the control box, pinch the 2 clips at the end of the connector and pull at the
same ti me
(see
fi gure ).
CLICK
CLICK
Tip: positi oning the box for bett er operati on
Place the control box halfway along the length of the pool, in accordance with the safety conditi ons relati ng
to the electrical connecti on.