Polaris UTV 2x4 Series 11 Скачать руководство пользователя страница 87

Страница: 87 / 108

MAINTENANCE AND LUBRICATION

Rollover Protection Structure (ROPS)

The ROPS, like any other safety device, must be periodically inspected

for damage caused by normal machine use, misuse, age, modifications

or rollovers. Inspection of the ROPS requires an understanding of the

significance of issues like structural corrosion, cracks and deformation.

When in doubt, remove the ROPS from service and see your Polaris

dealer for assistance.

The ROPS is unusable if any of the following conditions are

evident:

Permanent deformation or twisting

Missing, damaged or loose mounting hardware

Heavily weathered or torn rubber isolators

Mounting hardware that is of a grade lesser than specified

Any cracks in the structure (structural members and/or welds)

Significant corrosion

Modifications (unauthorized welds or holes)

Missing or unreadable ROPS label

Applicable ROPS/machine model not specified on the ROPS label

Machine GVW (including attachments, restrained payload, fuel and

operator) in excess of the maximum weight specified on the ROPS

label

Missing, damaged or unusable seatbelts

Any unauthorized repair

Incomplete or improper installation

WARNING

Operating a Polaris UTV with a damaged or defective Rollover

Protection Structure (ROPS) can result in serious injury or death

to the operator and/or passenger in the event of a rollover.
Inspect the ROPS as outlined in the Owner’s Manual and see

your Polaris dealer for assistance or needed repairs.

Содержание UTV 2x4 Series 11













































































































Результаты поиска

Содержание UTV 2x4 Series 11

Отзывы:

Похожие инструкции для UTV 2x4 Series 11

Бренды по названию

Популярные бренды

Polaris UTV 2x4 Series 11, Руководство пользователя

Результаты поиска

Содержание UTV 2x4 Series 11

Отзывы:

Похожие инструкции для UTV 2x4 Series 11

Бренды по названию

Популярные бренды