Polaris UTV 2x4 Series 11 Скачать руководство пользователя страница 86

Страница: 86 / 108

MAINTENANCE AND LUBRICATION

Seat Belts

Inspect all three seat belts for proper operation before each use of the

vehicle.
1. Push the latch plate into the buckle until it clicks. The latch plate

must slide smoothly into the buckle. A click indicates that it’s

securely latched.

2. Push the red button in the middle of the buckle to make sure it

releases freely.

3. Check the belt webbing for wear, cuts or damage. If any

irregularities are found, have the seat belt system checked and/or

replaced by an authorized Polaris dealer.

The UTV seat belt is adjustable and

should be adjusted for both the

operator and passenger before

driving. Although having the belt

at 30

is typical for many people, it

will not accommodate all body

sizes and shapes.

Make sure

the seat belt is adjusted to the

lowest possible lap position

before riding.

1. To adjust, loosen the bolts (1).

2. Reposition both the buckle and

retractor. Tighten bolts.

NOTE:

The center belt does not self adjust. Before riding, pull on the

strap to secure the belt on the lap of the center passenger.

WARNING

Failure to follow the age recommendations for this vehicle could

result in serious injury or death. No one under the age of 16 may

operate this vehicle. No one under the age of 5 may ride as a

passenger in this vehicle.

Содержание UTV 2x4 Series 11













































































































Результаты поиска

Содержание UTV 2x4 Series 11

Отзывы:

Похожие инструкции для UTV 2x4 Series 11

Бренды по названию

Популярные бренды

Polaris UTV 2x4 Series 11, Руководство пользователя

Результаты поиска

Содержание UTV 2x4 Series 11

Отзывы:

Похожие инструкции для UTV 2x4 Series 11

Бренды по названию

Популярные бренды