Polaris turbo iq Скачать руководство пользователя страница 58

Страница: 58 / 159

THE PERFECT FIT

IQ/LX Rear Suspension Adjustments

Torsion Spring Preload

To adjust rear torsion spring preload, rotate the three-position cam using

the engine spark plug tool. Adjustment is easiest when the cam is

rotated from low to medium, and then to high. Rotating directly from

low to high will require significantly more effort.
Different rate torsion springs are available if a firmer ride is desired. See

your dealer for more information.

Limiter Strap Position (Ski Pressure)

Ski pressure is set at the factory to

deliver the optimum balance between

ride and handling. If a rider prefers

more ski pressure for improved steer-

ing performance, adjustments can be

made to the front limiter straps.

Tighten the straps to increase ski

pressure. Loosen the straps to reduce

ski pressure.

1. Remove the nuts and flat washers

from the upper limiter straps.

2. Relocate the straps to the desired position.
3. Reinstall the nuts and washers. Tighten securely.

Soft

Medium

Firm

Upper

Nuts

Содержание turbo iq
































































































































































Результаты поиска

Содержание turbo iq

Отзывы:

Бренды по названию

Популярные бренды

Polaris turbo iq, Руководство пользователя

Результаты поиска

Содержание turbo iq

Отзывы:

Бренды по названию

Популярные бренды