Polaris turbo iq Скачать руководство пользователя страница 28

Страница: 28 / 159

SAFETY

Safety Decals and Locations

Reverse Warning

Polaris snowmobiles equipped with electric reverse and will have this

decal on the console:

WARNING
Reverse operation, even at low speeds, can cause loss of control

resulting in serious injury or death. To avoid loss of control,

always:

• Look behind before and while backing up.
• Avoid sharp turns.
• Shift to or from reverse only when stopped.
• Apply throttle slowly.

NOTE: For more information, see Owner's Manual.
If electric reverse:

• Machine stopped and engine at idle, push yellow button on LH con-

trol to reverse. Flashing light on dash indicates reverse operation.

• Push button again to return to forward.

Reverse Warning

Operation

Warning

Reverse Warning

Operation

Warning

Содержание turbo iq
































































































































































Результаты поиска

Содержание turbo iq

Отзывы:

Бренды по названию

Популярные бренды

Polaris turbo iq, Руководство пользователя

Результаты поиска

Содержание turbo iq

Отзывы:

Бренды по названию

Популярные бренды