Instr 9927475
Rev 01 2017-02
Page 9 of 14
HANDLEBAR SWITCH OPERATION
• When properly installed, the handlebar switch
allows you to operate the winch while seated on the
vehicle. See the illustration below for proper switch
operation.
WIRELESS REMOTE OPERATION
• When properly installed, the wireless remote will
allow you to operate the winch from off the vehicle,
which can be a safe way to operate the winch when
done properly.
• To use the wireless remote, hold the small "On/Off"
button for three seconds or until the LED light on the
remote turns on. If the vehicle is on so that the
winch is receiving power, the wireless remote
should operate the winch as if you were using the
winch switch
q
located on the handlebar. If the
remote is not operating properly, see the
troubleshooting information at the end of the
instructions.
• The remote will automatically turn itself off after 30
seconds of inactivity. You will therefore need to turn
the remote back on if it has been more than 30
seconds since prior use.
• To manually turn off the remote, hold the small "On/
Off" button for 3 seconds or until the LED light turns
off.
• See the illustration below for proper wireless remote
operation.
